Micro Digital Satellite Receiver Guía de instalación descargar pdf (Pagina 23)

www.geosatpro.com Toll Free 888-483-4673

microHD Installation Menu Setup

Highlight Satellite List. Press

OK to enter.

Highlight Installation icon. Press

OK to enter.

Highlight the target satellite using

the UP / Down navigation arrows. Press

OK to activate. Press EXIT to return to

the Installation menu.

Highlight Antenna Setup. Press

OK to enter.

To receive Free To Air (FTA) programming, the receiver menus must be configured

and the dish aimed for the satellite that you wish to receive and for the satellite

equipment that is connected.

Before programming the receiver you will need to know what satellite carries the

channels that you wish to receive. If you do not know the name of the satellite,

visit www.lyngsat.com for a list of satellites and the available channels. The

majority of free channels in North America are found on satellite Galaxy 19. For

this installation example, we will be setting up to receive satellite Galaxy 19 -

97W KU G19 with an active transponder, 11842MHz.

Highlight Motor / Switch Setting.

Press OK to enter.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 72 73

Sin comentarios

Micro Digital Satellite Receiver Guía de instalación Pagina 23